Would someone be so kind................

9 replies [Last post]
kashi123
kashi123's picture
Offline
Joined: 07.11.2003

as to providing me with a partnumber please? :D

I am looking for the master brake cylinder or repair kit

Chassis number: WDB 46033222030190

300Gd 1983

Thanking you in advance,

Best regards

Richard

JMKOZ
JMKOZ's picture
Offline
Joined: 28.03.2004
Location: Melbourne Australia
Re: Would someone be so kind................

No guarantees - I haven't checked the EPC but I think the Master is A0044309401 and the kit A0044309301

I hope that this helps.

John

fixwin38
fixwin38's picture
Offline
Joined: 09.07.2006
Location: northern ireland
GWOA Groups: Members
Re: Would someone be so kind................

Hi for future reference your vin number should be WDB 46033227030190... 4 speed G'box and steel wheels with no wide arches.it should have black door cards... Mtex seatcovers.. nets on the back of the seats..built in the first six months of 1983.....check the number on the chassis leg aft of the front wheel or data plate on the air intake duct at the back of the engine......

kashi123
kashi123's picture
Offline
Joined: 07.11.2003
Re: Would someone be so kind................

Thank you very much!

Fixwin, I took the number off the logbook, do you think that is wrong then?
It is indeed a 4 speed but now has alloys and wide arches. Doorcards are black and nets are present. I will cross check the number on the data plate.

Thanks again

Richard

fixwin38
fixwin38's picture
Offline
Joined: 09.07.2006
Location: northern ireland
GWOA Groups: Members
Re: Would someone be so kind................

Hi the third 2 should be a 7..not the first time I have seen this error... but it can be a problem if you sell and the buyer checks the data plate / chassis leg..DVLA will issue a V5 with the correct number if you write in and explain what is wrong ( an MOT centre confirmation letter helps) ......

kashi123
kashi123's picture
Offline
Joined: 07.11.2003
Re: Would someone be so kind................

Fixwin: you are 100% right about the 2 being a 7.

thanks

richard

mortinson
mortinson's picture
Offline
Joined: 06.11.2003
Location: Old beehive, Madrid, Spain
Re: Would someone be so kind................

Next time you don't even need to ask... there's a free EPC on the net, courtesy of the Russian Mercedes Club. By entering your complete 17-digit VIN you have access to the complete EPC.

This is valid for all Mercedes passenger CARS, G-Wagens, Transporters, Trucks, Bus, Unimog and MB Track tractors:

http://www.detali.ru/cat/oem_mb.asp

In you case, the section you want to look at is:
http://www.detali.ru/cat/oem_mb2.asp?TP=2&F=460332&A=460533&M=617931&GM=...

You can find the part numbers you need there:

marcus
marcus's picture
Offline
Joined: 02.05.2004
Location: Co. Antrim, N. Ireland
GWOA Groups: Members
Re: Would someone be so kind................

Jesus
Tsk tsk
It is a MB Trac
Scheesh!!

kashi123
kashi123's picture
Offline
Joined: 07.11.2003
Re: Would someone be so kind................

mortinson wrote:
Next time you don't even need to ask... there's a free EPC on the net, courtesy of the Russian Mercedes Club. By entering your complete 17-digit VIN you have access to the complete EPC.

This is valid for all Mercedes passenger CARS, G-Wagens, Transporters, Trucks, Bus, Unimog and MB Track tractors:

http://www.detali.ru/cat/oem_mb.asp

In you case, the section you want to look at is:
http://www.detali.ru/cat/oem_mb2.asp?TP=2&F=460332&A=460533&M=617931&GM=...

You can find the part numbers you need there:

Thank you :lol:

kashi123
kashi123's picture
Offline
Joined: 07.11.2003
Re: Would someone be so kind................

Woohoo, she PASSED today!! :D

In the end got a master cylinder from local Motor Factors for £59,- inc VAT, not too bad that. Was alot more from the main dealers, as one would expect!

Off tomorrow to pick her up, haven't seen the G in 6 months, oh the joy of working away.. :(

Again, thanks for all the help

Richard