W460 Diff lock sleeve in rear axle rotated
Sun, 10/09/2023 - 11:37
Hi,
I was busy rebuilding the rear axle diff lock slave, and moved the G with the slave removed. Now the diff lock sleeve inside the axle has moved
Sun, 10/09/2023 - 11:46
#1
Re: W460 Diff lock sleeve in rear axle rotated
I think the image cut off the remainder of my post.
I tried jacking up both wheels and rotate them to get the diff lock pin hole visible again with no luck.
Any ideas how I fix this?
Thanks in advance.
Johann
Mon, 11/09/2023 - 16:12
#2
Re: W460 Diff lock sleeve in rear axle rotated
Solved with the assistance of an old friend.
Take a small flat screwdriver and use the one edge point to rotate the tube until the hole is visible again. I also had to push the tube towards the diff a bit as it slided to the left.
Tue, 12/09/2023 - 10:36
#3
Re: W460 Diff lock sleeve in rear axle rotated
Result! Old friends are good value.
JOIN THE GWOA
This website and forum are provided for the benefit of enthusiasts and owners of all Mercedes Benz off road vehicles, in particular the G Wagen. The costs of development, upkeep and provision of the site are met entirely by the annual subscriptions of club members. If you are using the site and are not a member of the G Wagen Owners Association please consider joining. You will have access to areas on the site that are not open to non members, to club trips and meetings and to technical assistance. In addition your contribution (only £25 annually) will help us maintain and develop our website for future users.
Who's new
- Jaffa_JIM_23
- Wrabstar
- GG
- KTMSCANIA22
- 280ge
